No. 001 · Cutting Layout Optimizer
Plan every cut. Waste nothing.
Enter the boards or sheets you have on hand and the parts you need — CutListPro lays out the most efficient cutting plan automatically, so less material ends up in the scrap pile.
- Free, forever
- No signup required
- Works offline in the shop
How it works
Three steps from board pile to cutting plan
- 01
Enter your stock
List the boards or sheets you already have on hand — lengths, widths, and how many of each.
- 02
Add what you need
Enter the parts to cut. CutListPro accounts for kerf, trim, and grain direction automatically.
- 03
Get your cutting plan
See an optimized layout with minimal waste — ready to print and take straight to the saw.
Free & instant
Your cutting calculator
Runs right here in your browser — add your stock and the parts you need below, then calculate an optimized cutting plan. Nothing is uploaded anywhere.
Saved locally on this device — not backed up anywhere else.
Boards and rails — length-only cuts, with kerf and trim.
01 · On hand
Your stock
The boards you already have to cut from. Leave count blank for unlimited.
Stock 1
02 · Parts to cut
What you need
Every piece to cut, and how many of each.
Cutting miters? Tap a part's end-cut chip to set angles — nesting mating cuts saves stock.
Part 1
03 · Cutting settings
Kerf, trim & units
Units
Fill in your stock and parts, then calculate.
04 · Cutting plan
Results
Add your stock and parts above, then hit Calculate to see your optimized cutting plan.
Coming soon
Know when Pro ships
Cloud sync & saved presets are coming — get one email when Pro launches. No spam, ever.